Our Ship
Part III
M/V Technical Specifications
MV Oleander- Technical Specification
| Hull # | YZJ2016-1262 |
| Delivered: | January 28, 2019 |
| Flag: | Marshall Islands |
| Port of registry: | Majuro |
| IMO#: | 9827334 |
| Official #: | 8204 |
| MMSI#: | 538008204 |
| Radio Call Sign: | V7A2078 |
| GRT: | 8313 |
| NRT: | 3738 |
| DWT: | 6474.06t at 6.3 M draft |
| Light Ship Disp: | 4062.64t |
| Length overall: | 120m |
| Length between perpendiculars: | 115.0m |
| Beam: | 20.0m |
| Depth: | 9.0m |
| Draft (Summer): | 6.5 |
| Freeboard (Summer): | 2.513m |
| Main engine: | MAK9M32ETier II |
| M/E Serial#: | 88036 |
| Max continuous rating: | 4950 kW @ 750 rpm |
| Service rating: | 4207.5 kW @750 rpm |
| Service speed: | 14.47 knots / at loaded condition (85% MCR 15% sea margin with PTO) |
| Gearbox: | RSV-900 |
| Propeller: | N141CC7T |
| Bow thruster: | KT-72B3 |
| Auxiliary: | 3 x Lindenberg. Scania DI 16 091M (04-73B) IMO III |
| Shaft Generator: | 1 x 1000kw |
| Fuel capacity: | Heavy fuel: 477m3 Marine gas oil 234m3 |
| Fuel consumption: | HFO about 850kg/h at 85% MCR (based on heat value 40100kJ/kg) 2677.6kW on propeller shaft + 1000kW on Shaft Generator |
| Endurance: | About 6,000 nm |
| Lube oil capacity: | 38m3 |
| Fresh water capacity: | 149m3 |
| Ballast tank capacity: | 3557m3 |
| Container capacity: | 456teu |
| 20 ft Container Stack Weights: | 45 MT on deck Main deck. 15MT on B-Deck. |
| Reefer plugs: | 72 plugs |
| Stern Ro-Ro ramp capacity: | 60 MT |
| Vehicle capacity: | 60 MT |
| Trailer capacity Garage: | 6 |
| Trailers Re-Ro on deck hatches: | 8 |